Standard type gantry comes with a stocker outlet on the machine left hand side; however, right hand side outlet and passage type outlet are both available. In addition to flat type and multi-layer type stockers, multi-layer palletizing stocker 'Hako-bei' is also available, which is suitable for small sized workpieces.

Jump programming function helps start automatic operation from different patterns, depending on the machining status and chucking status of the parts. This simplifies restarting automatic operation, especially after irregular machine stops. By confirming the machining status of the part, the control automatically jumps to the relevant program block and starts the program.

GR-210

For twin spindles (STW-40)

3 axis (Z-axis. x-axls, Y-axis) type Gantry loader. Max handling weight 20kg is available for the GR-210, on condition of handling one part at time for more clamping force or other requirements.

• Contact our Precsion Engineering division

GR-203

For twin spindles (Super NTJ)

Flange type (standard) and shah hand type (optional) are available for GR loader hand. Max. part diameter varies depending on machine model.

• Contact our Precsion Engineering division

GR-201

For twin spindles (WT-100)

Passage type Gantry loader. A cell system consisting of a parts feeder that is most suitable for stocking irregularly shaped mass production raw part s, and palletizing Hako-bei stocker equipped with an external measurement dev ice for finished parts.

• Contact our Precsion Engineering division

GR-103

For single spindle (SC-250)

Gantry loader for single spindle machine equipped with a raw-part-hand and finished part-hand. In case of sub-spindle specification, a 180-degree-revolving Matab ei-hand is necessary.

• Contact our Precsion Engineering division